Advertisement [ ? ]
Site Links
- Lease Calculator
- Advertise
- My Car ongoing Review
- Members' Chat
- Cars For Sale
- Car Dealers
- Honda "Fit" Manual
- Hyperflex Bushings
- For Sale
- Fix your Car
- Car Manuals
- other manuals - Reference Materials
- DIY Repairs
- Articles
- Video
- Link with Us
- Search Help
- Code your Mac!
- Fly, race, anything R/C
Honda Fit/Jazz - DTC Troubleshooting: 2-1
Online Honda Fit/Jazz 2002-2005 Workshop repair manual used by professionals.
Full Membership required
We can not locate your Full (Preferred) membership details. Please login to your account first and if necessary upgrade your membership.
24 Hr or Annual Membership required.
Thank you!
Snip from the Manual
DTC Troubleshooting: 2-1
DTC 2-1: Open or Increased Resistance in Front Passenger's Airbag Inflator
Special Tools Required
SRS inflator simulator( 07SAZ-TB4011A)
IMAGE REPLACED HERE
SRS simulator lead C( 07TAZ-SZ5011A)IMAGE REPLACED HERE
1.Erase the DTC memory.
2.Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.
Does the SRS indicator stay on?
YES - Go to 3.
NO - Intermittent failure, system is OK at this time. Go to Troubleshooting Intermittent Failures.
3.Turn the ignition switch OFF. Disconnect the battery negative cable, and wait for 3 minutes.
4.Disconnect the P1o connector from the P1i connector (A).
IMAGE REPLACED HERE
5.Connect the special tool (2 W connector) to the P1i connector (A).
6.Reconnect the battery negative cable.
7.Erase the DTC memory.
8.Read the DTC.
Is DTC 2-1 indicated?
YES - Go to 9.
NO - Open or increased resistance in the front passenger's airbag inflator; replace the front passenger's airbag.n
9.Disconnect the battery negative cable, and wait for 3 minutes.
10.Disconnect the U1o connector (A) from the SRS unit.
IMAGE REPLACED HERE
11.Disconnect the SRS inflator simulator (special tool) from the SRS simulator lead C.
12.Check resistance between the A and B terminals of the SRS simulator lead C (special tool). There should be 1.0 W or less.
IMAGE REPLACED HERE
Is the resistance as specified?
YES - Faulty SRS unit or poor contact at the U1o connector and the SRS unit, check the connection between the U1o connector and the SRS unit. If the connection is OK, replace the SRS unit.n
NO - Open or increased resistance in the dashboard wire harness; replace the dashboard wire harness.n
minutes. 4.