DIY     OBD-II Codes     Fix your Car     Repair Manuals     -Forum-

Advertisement  [ ? ]

Site Links

Digg Twitter FaceBook

Honda Fit/Jazz - Rear Brake Shoes Replacement

Online Honda Fit/Jazz 2002-2005 Workshop repair manual used by professionals.

Full Membership required

We can not locate your Full (Preferred) membership details. Please login to your account first and if necessary upgrade your membership.
24 Hr or Annual Membership required.

Thank you!

Snip from the Manual


Rear Brake Shoes Replacement



IMAGE REPLACED HERE

Frequent inhalation of brake pad dust, regardless of material composition, could be hazardous to your health.


NOTE:

Disassembly


Remove the brake drum.

2.Remove the upper return spring (A) and lower return spring (B).

IMAGE REPLACED HERE

3.Remove the tension pins (A) by turning them while pushing each retainer spring (B).

IMAGE REPLACED HERE

4.Disconnect the parking brake cable from the parking brake lever, and remove the brake shoes from the backing plate.

5.Remove the clevis (A), adjuster bolt (B), and clevis (C), and separate the brake shoes (D).

IMAGE REPLACED HERE

6.Remove the self-adjuster spring (E) and self-adjuster lever (F).

7.Remove the U-clip (A), and remove the parking brake lever (B) from the rear side shoe (C).

IMAGE REPLACED HERE

Reassembly


1.Install the parking brake lever (A) on the rear brake shoe (B), and secure it with a new U-clip (C). Pinch the U-clip securely to prevent it from coming off.

IMAGE REPLACED HERE

2.Apply Molykote to the backside edges of the brake shoes where shown. Wipe off any excess. Do not get grease on the brake linings.

IMAGE REPLACED HERE

3.Install the self-adjuster (A) and self-adjuster spring (B) on the front side brake shoe (C).

IMAGE REPLACED HERE

4.Connect the parking brake cable to the rear side brake shoe (D), and assemble the brake shoes with the clevis (E), adjuster bolt (F), and clevis (G).

5.Install the shoes on the backing plate, fitting the top of the brake shoes on the wheel cylinder pistons and the bottom of the brake shoes on the locating plate.

6.Install the tension pins (A), and secure them with the retainer springs by turning them while pushing each retainer spring (B).

IMAGE REPLACED HERE

7.Install the upper return spring (A) and lower return spring (B).

IMAGE REPLACED HERE

8.Install the brake drum.

9.Install the rear wheels.

bleed the brake system.

11.Press the brake pedal several times to set the self-adjusting brake.

Adjust the parking brake.

4. Disconnect


Honda Fit/Jazz 02-05 Workshop Manual    Back to all Manuals