Advertisement [ ? ]
Site Links
- Lease Calculator
- Advertise
- My Car ongoing Review
- Members' Chat
- Cars For Sale
- Car Dealers
- Honda "Fit" Manual
- Hyperflex Bushings
- For Sale
- Fix your Car
- Car Manuals
- other manuals - Reference Materials
- DIY Repairs
- Articles
- Video
- Link with Us
- Search Help
- Code your Mac!
- Fly, race, anything R/C
Honda Fit/Jazz - OPDS Unit Replacement
Online Honda Fit/Jazz 2002-2005 Workshop repair manual used by professionals.
Full Membership required
We can not locate your Full (Preferred) membership details. Please login to your account first and if necessary upgrade your membership.
24 Hr or Annual Membership required.
Thank you!
Snip from the Manual
OPDS Unit Replacement
NOTE: Review the seats replacement procedure in the body section before performing repair or service.Removal
1.Disconnect the negative battery cable, and wait at least 3 minutes before beginning work.
2.Disconnect the side airbag harness 2P connector.
seat-back cover.
4.Remove the cover (A), then disconnect the OPDS unit harness 8P and sensor connectors from the OPDS unit.
IMAGE REPLACED HERE
5.Remove the two screws (B) and OPDS unit (C).
Installation
1.Place the new OPDS unit on the seat-back frame. Tighten the two screws (A), and connect the OPDS unit harness 8P and sensor connector to the OPDS unit. Reinstall the cover.
IMAGE REPLACED HERE
Install the seat-back cover.
Install the seat assembly, then connect the side airbag harness 2P connector.
4.Reconnect the battery negative cable.
5.Set the seat-back in the normal position, and make sure there is nothing sitting on the front passenger's seat.
6.Initialize the OPDS unit.
7.After installing the OPDS unit, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6 seconds and then go off.