DIY     OBD-II Codes     Fix your Car     Repair Manuals     -Forum-

Advertisement  [ ? ]

Site Links

Digg Twitter FaceBook

Honda Fit/Jazz - Idle Speed Inspection - L13A6 (CVT)

Online Honda Fit/Jazz 2002-2005 Workshop repair manual used by professionals.

Full Membership required

We can not locate your Full (Preferred) membership details. Please login to your account first and if necessary upgrade your membership.
24 Hr or Annual Membership required.

Thank you!

Snip from the Manual


Idle Speed Inspection - L13A6

L13A6 engine


NOTE:
  • Leave the idle air control (IAC) valve connected.
  • Before checking the idle speed, check these items:
    • The malfunction indicator lamp (MIL) has not been reported on.
    • Ignition timing
    • Spark plugs
    • Air cleaner
    • PCV system

1.Disconnect the evaporative emission (EVAP) canister purge valve 2P connector.

2.Connect a tachometer (A) to the test tachometer connector (B), or connect the HDS or a scan tool to the data link connector (DLC) (C) located under the driver's side of the dashboard.

IMAGE REPLACED HERE

IMAGE REPLACED HERE

3.Start the engine. Hold the engine speed at 3,000 rpm (min-1) without load (in Park or neutral) until the radiator fan comes on, then let it idle.

4.Check the idle speed without load conditions: headlights, blower fan, rear defogger, radiator fan, and air conditioner are not operating.

Idle speed should be:700±50 rpm (min-1) (in Park or neutral)


5.Idle the engine for 1 minute with A/C switch ON, temperature control at maximum cool, blower fan at maximum speed, rear window defogger ON,headlights at high beam, then check the idle speed.

Idle speed should be:850±50 rpm (min-1) (in Park or neutral)


NOTE: If the idle speed is not within specification, do the symptom troubleshooting.

6.Reconnect the EVAP canister purge valve 2P connector.

NOTE: You can use the HDS or a scan tool to inspect idle speed.

(min


Honda Fit/Jazz 02-05 Workshop Manual    Back to all Manuals