Advertisement [ ? ]
Site Links
- Lease Calculator
- Advertise
- My Car ongoing Review
- Members' Chat
- Cars For Sale
- Car Dealers
- Honda "Fit" Manual
- Hyperflex Bushings
- For Sale
- Fix your Car
- Car Manuals
- other manuals - Reference Materials
- DIY Repairs
- Articles
- Video
- Link with Us
- Search Help
- Code your Mac!
- Fly, race, anything R/C
Honda Fit/Jazz - Driver's Airbag Replacement
Online Honda Fit/Jazz 2002-2005 Workshop repair manual used by professionals.
Full Membership required
We can not locate your Full (Preferred) membership details. Please login to your account first and if necessary upgrade your membership.
24 Hr or Annual Membership required.
Thank you!
Snip from the Manual
Driver's Airbag Replacement
Removal
1.Disconnect the battery negative cable, and wait at least 3 minutes before beginning work.
2.Remove the access panel (A) from the steering wheel, then disconnect the connector between the cable reel 4P connector (B) and driver's airbag 4P connector (C).
IMAGE REPLACED HERE
3.Remove the two Torx bolts (A) using a Torx T30 bit. Then remove the driver's airbag (B).
IMAGE REPLACED HERE
Installation
1.Place the new driver's airbag (A) in the steering wheel, and secure it with new Torx bolts (B).
IMAGE REPLACED HERE
2.Connect the cable reel 4P connector (A) to the driver's airbag 4P connector (B), then install the access panel (C) on the steering wheel.
IMAGE REPLACED HERE
3.Connect the battery negative cable.
4.After installing the airbag, confirm proper system operation:
- Turn the ignition switch ON (II); the SRS indicator should come on for about 6 seconds and then go off.
- Make sure the horn button works.