DIY     OBD-II Codes     Fix your Car     Repair Manuals     -Forum-

Advertisement  [ ? ]

Site Links

Digg Twitter FaceBook

Honda Fit/Jazz - DTC Troubleshooting: P2227 (13) (With ETCS)

Online Honda Fit/Jazz 2002-2005 Workshop repair manual used by professionals.

Full Membership required

We can not locate your Full (Preferred) membership details. Please login to your account first and if necessary upgrade your membership.
24 Hr or Annual Membership required.

Thank you!

Snip from the Manual


DTC Troubleshooting: P2227 (13)

DTC P2227: BARO Sensor Range/Performance Problem


1.Turn the ignition switch ON (II).

2.Check the BARO SENSOR in the DATA LIST with the HDS.

Is atmospheric pressure indicated?


YES - Go to 3.


NO - Go to 7.


3.Do the DTC CLEAR in the CLEAR MENU with the HDS.

4.Start the engine. Hold the engine speed at 3,000 rpm (min-1) with no load (in neutral) until the radiator fan comes on, then let it idle.

5.Test-drive under following conditions.


6.Monitor the OBD STATUS for DTC P2227 in the DTCs MENU with the HDS.

Is it FAILED?


YES - Go to 7.


NO - If it is PASSED, intermittent failure, system is OK at this time. If it is NOT COMPLETED, go to 4 and recheck.

7.Substitute a known-good ECM.

8.Check for Temporary DTCs or DTCs in the DTCs MENU with the HDS.

Are any Temporary DTCs or DTCs indicated?


YES - If DTC P2227 indicated, check for poor connections at the ECM, then go to 1. If any other Temporary DTCs or DTCs are indicated, go to the indicated DTC troubleshooting.


NO - Replace the original ECM.n

(0


Honda Fit/Jazz 02-05 Workshop Manual    Back to all Manuals