DIY     OBD-II Codes     Fix your Car     Repair Manuals     -Forum-

Advertisement  [ ? ]

Site Links

Digg Twitter FaceBook

Honda Fit/Jazz - DTC Troubleshooting: P1887 (53-1) (CVT)

Online Honda Fit/Jazz 2002-2005 Workshop repair manual used by professionals.

Full Membership required

We can not locate your Full (Preferred) membership details. Please login to your account first and if necessary upgrade your membership.
24 Hr or Annual Membership required.

Thank you!

Snip from the Manual


DTC Troubleshooting: P1887 (53-1)

DTC P1887: Problem in VABS Circuit


NOTE: Record all freeze data before you troubleshoot.
1.Check whether the ABS DTC is indicated.

Is the ABS DTC indicated?


YES - Perform the ABS troubleshooting by the indicated DTC, and recheck for DTC P1887 after troubleshooting.


NO - Go to 2.


2.Turn the ignition switch OFF.

3.Check for continuity between PCM connector terminal A23 and body ground, and between terminal A24 and body ground.

IMAGE REPLACED HERE

Bombardier ATV Service Manuals

Are there continuity?


YES - Go to 4.


NO - Repair open in the wire PCM connector terminals A23 and A24, and ground (G101), or repair poor ground (G101).n


4.Lift up the vehicle, and allow the wheels to rotate freely.

5.With driving the vehicle, measure the voltage between PCM connector terminals A18 and A23 or A24.

IMAGE REPLACED HERE

Is there pulsing voltage between 0-5 V?


YES - Check for loose terminal fit in the PCM connectors. If necessary, substitute a known-good PCM and recheck.n


NO - Go to 6.


6.Disconnect ABS control unit connector.

7.With driving the vehicle and remaining lifted up, measure the voltage between ABS control unit connector terminal No. 15 and body ground.

IMAGE REPLACED HERE

Is there voltage?


YES - Check for loose terminal fit in the ABS control unit connector.n


NO - Repair open or short in the VABS wire between PCM connector terminal A15 and ABS control unit.n

(G101), or


Can-Am ATV Service ManualsHigh Quality Online manuals, fast download

Honda Fit/Jazz 02-05 Workshop Manual    Back to all Manuals