Advertisement [ ? ]
Site Links
- Lease Calculator
- Advertise
- My Car ongoing Review
- Members' Chat
- Cars For Sale
- Car Dealers
- Honda "Fit" Manual
- Hyperflex Bushings
- For Sale
- Fix your Car
- Car Manuals
- other manuals - Reference Materials
- DIY Repairs
- Articles
- Video
- Link with Us
- Search Help
- Code your Mac!
- Fly, race, anything R/C
Honda Fit/Jazz - DTC Troubleshooting: P1213 (11-1) (5MT without ETCS)
Online Honda Fit/Jazz 2002-2005 Workshop repair manual used by professionals.
Full Membership required
We can not locate your Full (Preferred) membership details. Please login to your account first and if necessary upgrade your membership.
24 Hr or Annual Membership required.
Thank you!
Snip from the Manual
DTC Troubleshooting: P1213 (11-1)
DTC P1213 (11-1): IMA Circuit Low Voltage
1.Reset the ECM/PCM.
2.Start the engine, then let it idle for more than 5 seconds.
3.Check for Temporary DTCs or DTCs with the HDS or a scan tool.
Is DTC P1213 indicated?
YES - Go to 4.
NO - Intermittent failure, system is OK at this time. Check for poor connections or loose terminals at the IMA and the ECM/PCM.n
4.Turn the ignition switch OFF.
5.Disconnect the IMA 3P connector.
6.Turn the ignition switch ON (II).
7.Measure voltage between IMA 3P connector terminals No. 1 and No. 3.
IMAGE REPLACED HERE
Is there about 5 V?
YES - Go to 8.
NO - Go to 14.
8.Turn the ignition switch OFF.
9.Disconnect ECM/PCM connector A (31P).
10.At the wire harness side, check for continuity between IMA 3P connector terminal No. 2 and body ground.
IMAGE REPLACED HERE
Is there continuity?
YES - Repair short in the wire between the ECM/PCM (A31) and the IMA.n
NO - Go to 11.
11.Reconnect the IMA 3P connector and ECM/PCM connector A (31P).
12.Turn the ignition switch ON (II).
13.Measure voltage between ECM/PCM connector terminals A10 and A31.
IMAGE REPLACED HERE
Is there about 0.5-4.5 V?
YES - Update the ECM/PCM if it does not have the latest software, or substitute a known-good ECM/PCM, then recheck. If the symptom/indication goes away with a known-good ECM/PCM, replace the original ECM/PCM.n
NO - Replace the IMA.n
14.Measure voltage between ECM/PCM connector terminals A10 and A20.
IMAGE REPLACED HERE
Is there about 5 V?
YES - Repair open in the wire between the ECM/PCM (A20) and the IMA.n
NO - Update the ECM/PCM if it does not have the latest software, or substitute a known-good ECM/PCM, then recheck. If the symptom/indication goes away with a known-good ECM/PCM, replace the original ECM/PCM.n
V? YES