Advertisement [ ? ]
Site Links
- Lease Calculator
- Advertise
- My Car ongoing Review
- Members' Chat
- Cars For Sale
- Car Dealers
- Honda "Fit" Manual
- Hyperflex Bushings
- For Sale
- Fix your Car
- Car Manuals
- other manuals - Reference Materials
- DIY Repairs
- Articles
- Video
- Link with Us
- Search Help
- Code your Mac!
- Fly, race, anything R/C
Honda Fit/Jazz - DTC Troubleshooting: P0715 (34-2) (CVT)
Online Honda Fit/Jazz 2002-2005 Workshop repair manual used by professionals.
Full Membership required
We can not locate your Full (Preferred) membership details. Please login to your account first and if necessary upgrade your membership.
24 Hr or Annual Membership required.
Thank you!
Snip from the Manual
DTC Troubleshooting: P0715 (34-2)
DTC P0715: Problem in CVT Drive Pulley Speed Sensor Circuit
For KB, KE, KG, and KQ Models
NOTE:
- Record all freeze data and review General Troubleshooting Information before you troubleshoot.
- The illustration shows the example of connector terminal arrangement; connector terminal arrangement varies with the models.
1.Check whether the DTC for throttle position sensor (TPS) is indicated.
Is the DTC for TPS indicated?
YES - Perform the TPS troubleshooting, and recheck for DTC P0715 after troubleshooting.
NO - Go to 2.
2.Turn the ignition switch OFF.
3.Check for continuity between PCM connector terminals A23 and body ground, and between A24 and body ground.
IMAGE REPLACED HERE
Is there continuity?
YES - Go to 4.
NO - Repair open in the wire between PCM connector terminals A23 and A24, and ground (G101), or repair poor ground (G101).n
4.Disconnect CVT drive pulley speed sensor connector.
5.Turn the ignition switch ON (II).
6.Measure the voltage between CVT drive pulley speed sensor connector terminal No. 1 and body ground.
IMAGE REPLACED HERE
Is there about 5 V?
YES - Go to 7.
NO - Go to 19.
7.Turn the ignition switch OFF.
8.Disconnect PCM connector C (22P).
9.Check for continuity between CVT drive pulley speed sensor connector terminal No. 2 and body ground.
IMAGE REPLACED HERE
Is there continuity?
YES - Repair short in the wire between PCM connector terminal C7 and the CVT drive pulley speed sensor connector.n
NO - Go to 10.
10.Check for continuity between CVT drive pulley speed sensor connector terminal No. 3 and body ground.
IMAGE REPLACED HERE
Is there continuity?
YES - Go to 11.
NO - Repair open in the wire between CVT drive pulley speed sensor connector terminal No. 3 and ground (G101), or repair poor ground (G101).n
11.Connect PCM connector C (22P).
12.Turn the ignition switch ON (II).
13.Measure the voltage between CVT drive pulley speed sensor connector terminals No. 2 and No. 3.
IMAGE REPLACED HERE
Is there about 5 V?
YES - Go to 14.
NO - Go to 23.
14.Connect CVT drive pulley speed sensor connector.
15.Measure the voltage between PCM connector terminals C7 and A23 or A24.
IMAGE REPLACED HERE
Is there 0 V or about 5 V?
YES - Go to 16.
NO - Replace the CVT drive pulley speed sensor.n
16.Shift to the P position.
17.Start the engine, and let it idle.
18.Shift to the D position, and measure the voltage between PCM connector terminals C7 and A23 or A24 with engine idling.
IMAGE REPLACED HERE
Is there 1.5-3.5 V?
YES - Update the PCM if it does not have the latest software, or substitute a known-good PCM, then recheck. If the symptom/indication goes away with a known-good PCM, replace the original PCM.n
NO - Replace the CVT drive pulley speed sensor.n
19.Measure the voltage between PCM connector terminals A20 and A23 or A24.
IMAGE REPLACED HERE
Is there about 5 V?
YES - Repair open in the wire between PCM connector terminal A20 and CVT drive pulley speed sensor connector.n
NO - Go to 20.
20.Turn the ignition switch OFF.
21.Disconnect PCM connector A (31P).
22.Check for continuity between PCM connector terminal A20 and body ground.
IMAGE REPLACED HERE
Is there continuity?
YES - Repair short in the wire between PCM connector terminal A20 and CVT drive pulley speed sensor connector.n
NO - Update the PCM if it does not have the latest software, or substitute a known-good PCM, then recheck. If the symptom/indication goes away with a known-good PCM, replace the original PCM.n
23.Measure the voltage between PCM connector terminals C7 and A23 or A24.
IMAGE REPLACED HERE
Is there about 5 V?
YES - Repair open in the wire between PCM connector terminal C7 and CVT drive pulley speed sensor connector.n
NO - Update the PCM if it does not have the latest software, or substitute a known-good PCM, then recheck. If the symptom/indication goes away with a known-good PCM, replace the original PCM.n
OFF. 3.