Advertisement [ ? ]
Site Links
- Lease Calculator
- Advertise
- My Car ongoing Review
- Members' Chat
- Cars For Sale
- Car Dealers
- Honda "Fit" Manual
- Hyperflex Bushings
- For Sale
- Fix your Car
- Car Manuals
- other manuals - Reference Materials
- DIY Repairs
- Articles
- Video
- Link with Us
- Search Help
- Code your Mac!
- Fly, race, anything R/C
Honda Fit/Jazz - DTC Troubleshooting: P0500 (17-1) (5MT)
Online Honda Fit/Jazz 2002-2005 Workshop repair manual used by professionals.
Full Membership required
We can not locate your Full (Preferred) membership details. Please login to your account first and if necessary upgrade your membership.
24 Hr or Annual Membership required.
Thank you!
Snip from the Manual
DTC Troubleshooting: P0500 (17-1)
DTC P0500 (17-1): VSS Circuit Malfunction
1.Test-drive the vehicle.
2.Check the vehicle speed with the scan tool.
Is the correct speed indicated?
YES - Intermittent failure, system is OK at this time. Check for poor connections or loose wires at the VSS and at the ECM.n
NO - Go to 3.
3.Turn the ignition switch OFF.
4.Block the rear wheels and set the parking brake.
5.Raise the front of the vehicle, and make sure it is securely supported.
6.Turn the ignition switch ON (II).
7.Block the right front wheel, and slowly rotate the left front wheel.
8.Measure voltage between ECM connector terminals A18 and A24.
IMAGE REPLACED HERE
Does the voltage pulse between 0 V and 5 V or battery voltage?
YES - Substitute a known-good ECM and recheck. If symptom/indication goes away, replace the original ECM.n
NO - Go to 9.
9.Turn the ignition switch OFF.
10.Disconnect the negative cable from the battery.
11.Disconnect ECM connector A (31P).
12.Reconnect the negative cable from the battery.
13.Turn the ignition switch ON (II).
14.Block the right front wheel, and slowly rotate the left front wheel.
15.Measure voltage between ECM connector terminals A18 and A24.
IMAGE REPLACED HERE
Does the voltage pulse between 0 V and 5 V or battery voltage?
YES - Substitute a known-good ECM and recheck. If symptom/indication goes away, replace the original ECM.n
NO - Check these items:
- A short or an open in the wire between the ECM (A18) and the VSS.
- If the wire is OK, test the VSS.n