Advertisement [ ? ]
Site Links
- Lease Calculator
- Advertise
- My Car ongoing Review
- Members' Chat
- Cars For Sale
- Car Dealers
- Honda "Fit" Manual
- Hyperflex Bushings
- For Sale
- Fix your Car
- Car Manuals
- other manuals - Reference Materials
- DIY Repairs
- Articles
- Video
- Link with Us
- Search Help
- Code your Mac!
- Fly, race, anything R/C
Honda Fit/Jazz - DTC Troubleshooting: P0138 (63-2) (L12A/L13A 5MT without ETCS)
Online Honda Fit/Jazz 2002-2005 Workshop repair manual used by professionals.
Full Membership required
We can not locate your Full (Preferred) membership details. Please login to your account first and if necessary upgrade your membership.
24 Hr or Annual Membership required.
Thank you!
Snip from the Manual
DTC Troubleshooting: P0138 (63-2)
DTC P0138 (63-2): Secondary HO2S(Sensor 2) Circuit High Voltage
1.Reset the ECM/PCM.
2.Start the engine. Hold the engine at 3,000 rpm (min-1) with no load (in Park or neutral) until the radiator fan comes on.
3.Check the secondary HO2S (Sensor 2) output voltage at 3,000 rpm (min-1) with the HDS or the scan tool.
Is there 1.0 V or more?
YES - Go to 4.
NO - Intermittent failure, system is OK at this time. Check for poor connections or loose terminals at the secondary HO2S (Sensor 2) and the at ECM/PCM.n
4.Turn the ignition switch OFF.
5.Disconnect the secondary HO2S (Sensor 2) 6P connector.
6.Connect secondary HO2S (Sensor 2) 6P connector terminals No. 1 and No. 2 with a jumper wire.
IMAGE REPLACED HERE
7.Turn the ignition switch ON (II).
8.Check the secondary HO2S (Sensor 2) output voltage with the HDS or the scan tool.
Is there 1.0 V or more?
YES - Go to 9.
NO - Replace the secondary HO2S (Sensor 2).n
9.Turn the ignition switch OFF.
10.Connect ECM/PCM connector terminalsE2 and E4 with a jumper wire.
IMAGE REPLACED HERE
11.Turn the ignition switch ON (II).
12.Check the secondary HO2S (Sensor 2) output voltage with the HDS or the scan tool.
Is there 1.0 V or more?
YES - Update the ECM/PCM if it does not have the latest software, or substitute a known-good ECM/PCM, then recheck. If the symptom/indication goes away with a known-good ECM/PCM, replace the original ECM/PCM.n
NO - Repair open in the wire between the ECM/PCM (E2, E4) and the secondary HO2S (Sensor 2).n
5. Disconnect