Advertisement [ ? ]
Site Links
- Lease Calculator
- Advertise
- My Car ongoing Review
- Members' Chat
- Cars For Sale
- Car Dealers
- Honda "Fit" Manual
- Hyperflex Bushings
- For Sale
- Fix your Car
- Car Manuals
- other manuals - Reference Materials
- DIY Repairs
- Articles
- Video
- Link with Us
- Search Help
- Code your Mac!
- Fly, race, anything R/C
Honda Fit/Jazz - DTC Troubleshooting: 4-1
Online Honda Fit/Jazz 2002-2005 Workshop repair manual used by professionals.
Full Membership required
We can not locate your Full (Preferred) membership details. Please login to your account first and if necessary upgrade your membership.
24 Hr or Annual Membership required.
Thank you!
Snip from the Manual
DTC Troubleshooting: 4-1
DTC 4-1: Open or Increased Resistance in Right Side Seat Belt Tensioner
Special Tools Required
SRS inflator simulator( 07SAZ-TB4011A)
IMAGE REPLACED HERE
SRS simulator lead F( 07XAZ-SZ30100)IMAGE REPLACED HERE
1.Erase the DTC memory.
2.Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.
Does the SRS indicator stay on?
YES - Go to 3.
NO - Intermittent failure, system is OK at this time. Go to Troubleshooting Intermittent Failures.
3.Turn the ignition switch OFF. Disconnect the battery negative cable, and wait for 3 minutes.
4.Disconnect the TR1o connector from the TR1i connector (A).
IMAGE REPLACED HERE
5.Connect the special tool (2 W connector) to the TR1i connector (A).
6.Reconnect the battery negative cable.
7.Erase the DTC memory.
8.Read the DTC.
Is DTC 4-1 indicated?
YES - Go to 9.
NO - Open or increased resistance in the right side seat belt tensioner; replace the right side seat belt.n
9.Disconnect the battery negative cable, and wait for 3 minutes.
10.Disconnect the TL1o connector (A) from the TL1i connector (B).
IMAGE REPLACED HERE
11.Disconnect the U2o connector (A) from the SRS unit.
IMAGE REPLACED HERE
12.Check resistance between the No. 3 terminal and the No. 4 terminal of U2o connector. There should be 2.0-3.0 W.
IMAGE REPLACED HERE
Is the resistance as specified?
YES - Faulty SRS unit or poor contact at U2o connector and the SRS unit, check the connection between the U2o connector and the SRS unit. If the connection is OK, replace the SRS unit.n
NO - Open or increased resistance in the floor wire harness; replace the floor wire harness.n
4. Disconnect