DIY     OBD-II Codes     Fix your Car     Repair Manuals     -Forum-

Advertisement  [ ? ]

Site Links

Honda Fit/Jazz - Block and Piston Inspection (L12A/L13A)

Online Honda Fit/Jazz 2002-2005 Workshop repair manual used by professionals.

Full Membership required

We can not locate your Full (Preferred) membership details. Please login to your account first and if necessary upgrade your membership.
24 Hr or Annual Membership required.

Thank you!

Snip from the Manual


Block and Piston Inspection

Remove the crankshaft and pistons.

2.Check the piston for distortion or cracks.

3.Measure the piston diameter (A) at a point 13 mm (0.5 in.) from the bottom of the skirt.

Piston Diameter:Standard (New):72.98-72.99 mm
(2.8732-2.8736 in.)
Service Limit:72.97 mm
(2.8728 in.)


IMAGE REPLACED HERE

Oversize Piston Diameter:0.25:73.23-73.24 mm (2.8831-2.8835 in.)

4.Measure wear and taper in direction X and Y at three levels in each cylinder as shown. If measurements in any cylinder are beyond the Oversize Bore Service Limit, replace the block. If the block is to be rebored, refer to


Honda Fit/Jazz 02-05 Workshop Manual    Back to all Manuals